Quality Assurance Sawtooth Tropical Hydroponic Plastic Film Greenhouses for Sale
1.This type of greenhouse is suitable for large-area planting and can be equipped with a variety of modern intelligent equipment to adjust the indoor temperature and humidity to adapt to the growth environment of crops, thereby increasing crop yields.
2.This kind of greenhouse is cheaper than glass greenhouse and polycarbonate greenhouse,it's can acheive the same effect with different material.
3.For some flower plants that require relatively high air temperature in the environment, the multi-span greenhouse is more suitable for growing and increasing yield. The main body adopts a hot-dip galvanized frame, which improves the life span.
4.Our after-sale service can keep all the time,whatever problem you meet we can solve them for you quickly!
Multi-span Greenhouse |
|||||
| Model | Width(m) | Length(m) | Distance between 2 arches(m) | Shoulder Height(m) | Roof Height(m) |
| AX-M-F-006 | 6.0/6.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.0-9.0 |
| AX-M-F-007 | 7.0/7.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.0-9.0 |
| AX-M-F-008 | 8.0/8.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.0-9.0 |
| AX-M-F-009 | 9.0/9.5/9.6 | Customize | 1.0-3.0 | 2.5-5.5 | 4.0-9.0 |
| AX-M-F-010 | 10.0/10.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.0-9.0 |
| AX-M-F-011 | 11.0/11.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.0-9.0 |
| AX-M-F-012 | 12 | Customize | 1.0-3.0 | 2.5-5.5 | 4.0-9.0 |
Saw-tooth Multi-span Greenhouse |
|||||
| Model | Width(m) | Length(m) | Distance between 2 arches(m) | Shoulder Height(m) | Roof Height(m) |
| AX-MS-F-006 | 6.0/6.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.6-8.3 |
| AX-MS-F-007 | 7.0/7.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.6-8.3 |
| AX-MS-F-008 | 8.0/8.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.6-8.3 |
| AX-MS-F-009 | 9.0/9.5/9.6 | Customize | 1.0-3.0 | 2.5-5.5 | 4.6-8.3 |
| AX-MS-F-010 | 10.0/10.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.6-8.3 |
| AX-MS-F-011 | 11.0/11.5 | Customize | 1.0-3.0 | 2.5-5.5 | 4.6-8.3 |
| AX-MS-F-012 | 12 | Customize | 1.0-3.0 | 2.5-5.5 | 4.6-8.3 |
1. The membrane greenhouse is made of steel and mixed materials, and its main feature is the transparent thermal insulation covering material of plastic film. According to heating or not can be divided into heating film greenhouse and no heating film greenhouse。 2. effectively prevent heat loss and prevent the flow of cold air and heat loss, contribute to summer cooling and dehumidification;
2, the vault is more conducive to rain and snow slide, reduce wind resistance, improve the anti-load capacity of the greenhouse, reduce dew drop, reduce the incidence of germs caused by excessive humidity;
3, single-layer film users can flexibly choose the number and height of the top and side rolling curtain according to the actual needs and weather conditions, so as to better regulate the environment in the greenhouse;
The difference between “Multi-span Greenhouse” and “Saw-tooth Multi-span Greenhouse”？
A multi-span greenhouse which means it refers to a large-area greenhouse where multiple single-span greenhouses are connected together by a gutter.
What's the application?
This type of multi-span greenhouse can be used for visits and exhibitions, as well as for agricultural planting. Commonly used for planting vegetables such as tomatoes and cucumbers, and also for planting flowers, it is better to use with fill light lights.
Frame Structure Materials
High quality hot-dip galvanized steel structure, Zinc-coating 275 g/m2, service life over 20 years.
All steel materials are field-assembled, no secondary processing required.
The galvanized connectors and fasteners are not rusted for 20 years.
Covering Materials
PO/PE film covering Characteristic: Anti-dew and dustproof , Anti-dripping, anti-fog, anti-aging
Thickness:80/100/120/130/140/150/200micro
Light transmission:>89% Diffusion:53%
Temperature range: -40C to 60C
Cooling System: Cooling Pad
The cooling of greenhouse is achieved by the principle of evaporation and cooling of water. The special made cooling pad can ensure that the water evenly wets the entire cooling pad wall. When the air penetrates the cooling pad medium, it exchanges heat with the water vapor on the surface of the cooling pad to achieve humidification and cooling of the air.
Cooling system: Exhaust Fan
Size: 1380x1380x400m
Power: 1100 w
Voltage: 380V, 50Hz, PH1
Air volume: 44000 m3/h
Noise 60 decibels
Hot-dip galvanized steel frame, stainless steel fan blade
Ventilation system
The ventilation system is mainly used for gas exchange inside and outside the greenhouse. In order to achieve the purpose of adjusting the temperature, humidity and CO2 concentration inside the greenhouse.
Side ventilation or top ventilation system can be selected according to your planting requirements.
One is a manual ventilation system and the other is an electric ventilation system.
Internal Shading System
Anti-fog and anti-drip
Energy-saving and insulation
Water conservation
The curtains are divided into two types, ventilated and insulated. Different types and shading rate of curtains are used as needed. In order to increase the insulation effect in the greenhouse, double inside shading nets can be used.
External Shading System
The main function of the system is to cool and shade in the summer, so that the sunlight diffuses into the greenhouse to ensure that the crop is protected from glare of the sun. Anti-UV, anti-hail, reducing damage to the top of the greenhouse.
