AX製品

カテゴリー

Easy Ventilation Adjustment Manual Film Roller for Greenhouses

  1. Secure roller tube to greenhouse structure using brackets.

  2. Attach film edge to tube with integrated clamp/channel.

  3. Rotate the crank clockwise to roll up (ventilate), counter-clockwise to unroll (close).

  4. Engage locking pin at desired height.

製品詳細

 

Key Benefits:

✅ Smooth One-Person Operation: Easily roll/unroll heavy films (PE, PVC, insect netting) with our ergonomic crank handle – no ladders or straining needed.
✅ Ultimate Durability: Hot-dip galvanized steel core & components resist rust, chemicals, and UV damage for years of service.
✅ Precision Fit: Customizable lengths (4m-12m+) fit any greenhouse width. Adapts to round or square tubes (ø42mm, 48mm, 50mm standard).
✅ Secure Locking: Integrated locking pin holds film firmly at any position – withstands wind and prevents slippage.
✅ Low Maintenance: Sealed bearings and corrosion-proof design ensure worry-free performance season after season.

Technical Specifications:

  • Material: Hot-Dip Galvanized Steel (ISO 1461 Standard)
  • Tube Diameter: Standard 1.5″ / 48mm (Custom sizes: 42mm, 50mm available)
  • Max Film Weight: 8 kg/m (Adjustable based on model)
  • Gear Ratio: 1:3.5 (Optimal balance of speed & torque)
  • End Fixings: Heavy-duty wall brackets included (galvanized)
  • Handle: Foldable steel crank (360° rotatable for easy access)

1.あなたは工場ですか?
はい、私達は 15 年間タイプの温室のための製造業者です。
温室設計、アフターサービス、工場直販のプロフェッショナルなエンジニアチームにより、お客様のニーズにお応えします!

2.製品の品質を保証するには?
A.私達はalibabaの金色の製造者であり、10年間輸出に従事して、商品は40ヶ国以上に輸出され
世界市場で良い評判を得た。長期的な相互利益の協力は私達の経営哲学です。
B.すべてのバッチ商品が良好な状態であることを確認するために、私たちの検査部門は、製品を徹底的に検査し、テストします。
納品前に入念な検査を行います。お客様のご要望に応じて、必要な試験や認証を取得することができます。

3.梱包・配送について
A.商品は名前および部品、カートンへの付属品、束による管に従って印が付いています、すべての商品はに荷を積みます
コンテナを直接購入することをお勧めします。
B.Shipping 港は通常チンタオ/上海、私達あなたの補償を得た後あなたのための船積みを整理してもいいですです。

4.説明書やマニュアルガイドのインストールはありますか?
A.はい、あなたの取付けを容易に導くために商品とともに出荷されるデッサンそしてビデオが付いている英語のマニュアル。
B.エンジニアの海外ガイド設置が可能。
C.あなたの労働者かエンジニアはあなたの温室の取付けを学ぶために私達の工場に歓迎されます。

jaJapanese
見積依頼
Contact Form Demo (#6)