Hydroponics Seedling Nursery Tidal Seedbed Venlo Glass Greenhouse-PMV019
1-The light transmittance is more than 90%.
2-It has high thermal insulation performance, it is especially suitable for some products that require thermal insulation and have high value.
3-Greenhouse is with modern and novel apperance, stable structure.
4-It can resist heavy and strong snow/wind, and very easy to clean and maintain.
5-The life time of the greenhouse main body is more than 20years.
|Material||Hot Dipped Galvanized Steel with zinc coated 275gsm|
|Advantage||High and even light transmission, Long lifetime and high intensity|
|Strong corrosion resistance and fire resistance|
|Good thermal insulation performace.|
|Modern and elegant design|
|Max.discharge water ability||120mm/h(5 minutes per time)|
|Greenhouse in usual load ability||greenhouse in usual load ability|
|Greenhouse covering||Roof-4,5.6,8,10mm single layer tempered glass
4-side surrounding: 4m+9A+4,5+6A+5 hollow glass
|Greenhouse use span length||9.6m/10.8m/12m|
|Greenhouse use eaves height||2.5m-7m|
About AX Glass Greenhouse
As we all know, Venlo greenhouse first appeared in the Netherlands.
AX Greenhouse is constantly learning all over the world as it develops.
Therefore, in 2005, we began to practice the Venlo greenhouse in China, a country with diverse natural environments.
We have built greenhouses in Tibet, which is cold and snowy, in Xinjiang, which is hot and lacks water, and we have built greenhouses in the humid and sultry coastal areas.
Therefore, we have accumulated a lot of data in more than 10 years. Data about the carrying data of the greenhouse and plants.
On the premise of meeting planting needs. We have accumulated data on greenhouse structure. At the same time, under the control of the greenhouse environment, we have also accumulated plant growth data.
Frame Structure Materials
High quality hot-dip galvanized steel structure, Zinc-coating 275 g/m2, service life over 20 years.
All steel materials are field-assembled, no secondary processing required.
The galvanized connectors and fasteners are not rusted for 20 years.
Cooling System: Cooling Pad
The cooling of greenhouse is achieved by the principle of evaporation and cooling of water. The special made cooling pad can ensure that the water evenly wets the entire cooling pad wall. When the air penetrates the cooling pad medium, it exchanges heat with the water vapor on the surface of the cooling pad to achieve humidification and cooling of the air.
Cooling system: Exhaust Fan
Power: 1100 w
Voltage: 380V, 50Hz, PH1
Air volume: 44000 m3/h
Noise 60 decibels
Hot-dip galvanized steel frame, stainless steel fan blade
The ventilation system is mainly used for gas exchange inside and outside the greenhouse. In order to achieve the purpose of adjusting the temperature, humidity and CO2 concentration inside the greenhouse.
Side ventilation or top ventilation system can be selected according to your planting requirements.
One is a manual ventilation system and the other is an electric ventilation system.
Internal Shading System
Anti-fog and anti-drip
Energy-saving and insulation
The curtains are divided into two types, ventilated and insulated. Different types and shading rate of curtains are used as needed. In order to increase the insulation effect in the greenhouse, double inside shading nets can be used.